Independent repair

GE Appliance Repair in Northern Virginia, DC & Maryland

GE Appliances sells four lines under one roof: GE, GE Profile, Café and Monogram. FixDaddy handles GE appliance repair for all four across Northern Virginia, Washington DC and Maryland, from a plain GE top-load washer to a Monogram column refrigerator. We fix GE refrigerators, washers, dryers, dishwashers, ranges, wall ovens and microwaves, and the common parts ride on our truck.

Call (888) 811-0088 Book online

$89 visit, credited to the repair
90-day parts & labor warranty
Same-day most days
Someone answers 24/7

FixDaddy is an independent repair company. We are not affiliated with, authorized by, or a warranty servicer for GE Appliances or Haier. If your GE is still inside its maker's warranty, call GE Appliances first.

GE lines we see most

Know your GE

GE
The core line. Model numbers start with G for laundry, dishwashers and refrigerators and J for ranges, microwaves and hoods. Top-load washers are GTW, front-loaders GFW, vented dryers GTD or GFD, built-in dishwashers GDT (top control) or GDF (front control), gas ranges JGB, electric ranges JB, over-the-range microwaves JVM. Plain controls and plain parts.
GE Profile
The step up. Model numbers start with P. Profile adds SmartHQ app connectivity and features like TwinChill on French-door refrigerators, where one compressor feeds two separate evaporators so the fresh-food and freezer sections do not share air. Two evaporators means two coils and two fans to check when one side runs warm.
Café
Model numbers start with C. The point of the line is the hardware: knobs and handles you pick in brushed bronze, brushed copper, brushed stainless or brushed black, on matte white, matte black or stainless bodies. Underneath they are GE Appliances machines and take GE Appliances part numbers.
Monogram
The luxury line. Model numbers start with Z: ZDP dual-fuel and ZGP all-gas pro ranges, ZHP induction ranges, built-in and column refrigerators, and wall ovens and built-in Advantium ovens sold in Minimalist and Statement trim. Advantium built-ins come in 120-volt and 240-volt versions.
Haier and Hotpoint
Both are GE Appliances brands too. Haier model numbers start with Q and Hotpoint with H. Many parts cross over: the same ice maker kit fits GE and Hotpoint refrigerators. Haier is on our brand list.

What fails

What actually breaks on GE appliances

1
Top-load washer fills and drains but never washes, or washes but never spins
On GTW top-loaders a small shift actuator, which GE calls the mode shifter, moves the drive between the agitate stroke and high-speed spin. When it sticks in one position the washer does the other job fine and skips this one: no grinding, no leak, just wet clothes that were never washed or never spun. A healthy actuator gives a soft click as the machine hands off from wash to spin, and silence at that moment points straight at it. The symptom on a GE washer we saw in Great Falls was exactly that: the agitator stopped partway through and the load came out soaking wet and still dirty.
2
Dryer drum turns but there is no heat
GE electric dryers in the GTD series run the heater through a thermal fuse on the blower housing at the back, a high-limit thermostat and the element itself. The thermal fuse is a one-shot part: once it blows the dryer runs cold for good, and it almost always blows because the vent is choked with lint. So the fix is the fuse plus the vent, or the new fuse goes the same way. A GE dryer in Vienna ran with no heat at all and traced to exactly that, a blown thermal fuse.
3
Fresh-food side warm, frost on the freezer back wall
GE side-by-sides and top-freezers defrost the evaporator with a glass-tube heater and a defrost thermostat behind the freezer's back panel. When the heater or thermostat fails, the coil ices over, airflow to the fresh-food side stops, and the compressor runs and runs. The other suspect is the main control board (WR55X10942 on many models). It drives the fans and the compressor relay, so a board fault shows up as the evaporator fan not running, the compressor off while both fans spin, or a steady clicking from behind the fridge, often after a power outage.
4
Ice maker cycles but never fills, or just stops
The electromechanical ice maker on most older GE refrigerators is the WR30X10093 kit. When the mold tray stays dry the ice maker can keep turning over without ever dropping a cube. The water side is a fill tube that freezes shut or an inlet valve that no longer opens. If the tray makes and ejects cubes when it is filled by hand, the ice maker itself is fine and the water path is the problem.
5
Gas oven will not heat while the burners work
On JGB and JGBS GE gas ranges the bake igniter (WB13K21) has to glow hot enough to pull the current that opens the gas valve. As it ages it glows dimmer, the oven takes longer and longer to light, then never does. More than about 90 seconds from turn-on to flame means it is on the way out; two minutes of glow with no flame means it is done. The oven sensor (WB21X22134) is the other common part when an oven runs hot, runs cold or will not hold temperature; it should read about 1,080 to 1,090 ohms at room temperature.
6
Coil burner on an electric range dead, or the oven slow to preheat
GE's plug-in coil elements are Calrod units. The 6-inch coil is WB30M1 and the 8-inch is WB30M2, and they pull straight out of a receptacle block. The block can burn as well as the coil, so both get checked. A slow preheat on the same range is usually the bake element at the bottom of the oven or the oven sensor.
7
Over-the-range microwave runs, light and fan on, but food stays cold
GE's Spacemaker over-the-range microwaves (JVM series) use two door switches, plus a magnetron fed by a high-voltage capacitor and diode. A door switch the control stops reading is a small part. A failed magnetron is the big one, and on an older Spacemaker our technician will tell you at the house whether it makes sense.

Parts

GE part numbers tell you what they fit: WB is cooking, WR is refrigeration, WD is dishwashers, WE is laundry. GE Appliances runs its own parts store, geapplianceparts.com, and the same numbers are stocked by the big independent distributors. The catalog is also old and stable: the WR30X10093 ice maker fits GE, Hotpoint and Kenmore refrigerators going back years, and the WB13K21 igniter covers most JGB and JGBS ranges. Common GE parts ride on our truck. Anything else is ordered and our technician comes back to fit it. Every part is looked up by model number, so have the tag on the appliance handy.

Who makes GE appliances now

The GE on the door is a name, not the company. GE Appliances is owned by Haier, and it still builds washers, dryers, dishwashers, refrigerators and ranges in its own plants in Kentucky, Alabama, Georgia and Tennessee.

For you that means two things. Parts come from a maker that is still here and still runs its own parts store. And the machines are built to be opened up: laundry panels that come off the front, plug-in elements, a main board behind a single cover on the back of a GE refrigerator.

Reading the model tag before you call

The first letter of a GE Appliances model number is the line: G or J is GE, P is GE Profile, C is Café, Z is Monogram, Q is Haier, H is Hotpoint. The next letters are the machine. On laundry, T is a top-load, F a front-load and U a unitized stacked unit, so GTW is a GE top-load washer and GTD its matching vented dryer. On ranges, B is a 30-inch freestanding and S a slide-in, with G for gas and nothing for electric, so JGB is a GE gas freestanding range and JB the electric one. On dishwashers, T is top control and F front control.

Have the model number ready when you call. It is on a tag on the appliance itself, usually inside a door or lid, and it is what every GE part is looked up by.

What the visit looks like

Our visit fee is $89. The technician finds exactly what's wrong and gives you the full repair price at your home, no pressure. If you go ahead, the $89 counts toward the repair, and every repair has a 90-day warranty on parts and labor.

Someone answers the phone 24/7 and we can get to you the same day most days. You get a 2-hour arrival window and a call about 15 minutes before the truck pulls up. Our technician wears shoe covers, lays down floor protection and explains what is wrong in plain English before touching anything. If the part is on the truck the job is finished that visit; if not, it is ordered and the technician comes back. You pay when the work is done and the invoice comes by email or text.

By appliance

GE appliances we repair

Recent repairs

GE repairs we did recently

All repair stories

Oakton, VA
GE oven installation in Oakton
Our technician fitted a stainless steel GE double wall oven into the cabinet in Oakton, made the electrical connections, secured the mounting brackets, and ran both the upper…Our technician fitted a stainless steel GE double wall oven into the cabinet in Oakton, made the electrical connections, secured the mounting brackets, and ran both the upper and lower ovens to check for even heat and working controls. These units are heavy, and one that does not sit level and tight will not seal at the doors.
September 2026McLean, VA
GE refrigerator repair in McLean
Our technician was in McLean on a GE refrigerator with a fresh food section running warm. That is one of three complaints we get on these again and…Our technician was in McLean on a GE refrigerator with a fresh food section running warm. That is one of three complaints we get on these again and again. The other two are frost building up on the back wall and an evaporator fan that has gone loud.
Vienna, VA
GE dryer repair in Vienna
In Vienna, a GE dryer ran but put out no heat at all. Our technician traced it to a blown thermal fuse, the safety part that shuts the…In Vienna, a GE dryer ran but put out no heat at all. Our technician traced it to a blown thermal fuse, the safety part that shuts the heat down when the dryer runs too hot.
McLean, VA
GE Monogram range hood repair in McLean
Fan checks on a GE Monogram range hood in McLean. The underside is open, with parts and tools on the cooking surface below.
August 2026Annandale, VA
GE range repair in Annandale
The lower oven on a GE double-oven gas range in the Wakefield Forest part of Annandale stopped heating. The lower igniter is the first thing we check on…The lower oven on a GE double-oven gas range in the Wakefield Forest part of Annandale stopped heating. The lower igniter is the first thing we check on these. Spark modules shorting out and oven sensors reading cold are the other two GE range faults we see here.
Alexandria, VA
Monogram refrigerator repair in Alexandria
A GE Monogram built-in refrigerator in Alexandria carries cabinet panels on its doors, so it looks like the rest of the kitchen. Our technician opened the louvered grille…A GE Monogram built-in refrigerator in Alexandria carries cabinet panels on its doors, so it looks like the rest of the kitchen. Our technician opened the louvered grille at the top and worked on the refrigerator through there.

Show more matching repairs

Alexandria, VA
GE Profile oven installation in Alexandria
A built-in oven and microwave went into one cabinet cutout in Alexandria. Our technician made the electrical connections, secured the mounting hardware, and tested both units before leaving.…A built-in oven and microwave went into one cabinet cutout in Alexandria. Our technician made the electrical connections, secured the mounting hardware, and tested both units before leaving. A pair like this has to be measured close and wired right, or you get uneven gaps, overheating, or electrical trouble later on.
Washington, DC, DC
GE dishwasher repair in Washington, DC
In Washington, DC, our technician slid a GE front-control dishwasher out from under the counter to diagnose it. The stainless machine came all the way clear of the…In Washington, DC, our technician slid a GE front-control dishwasher out from under the counter to diagnose it. The stainless machine came all the way clear of the cabinet, which is what it takes to see the working parts on a built-in.
Arlington, VA
GE dryer repair in Arlington
A GE laundry center in Arlington was tumbling but running cold. The dryer side made no heat on any setting. That is the complaint we get most on…A GE laundry center in Arlington was tumbling but running cold. The dryer side made no heat on any setting. That is the complaint we get most on stacked units, and it comes in with two others: a thermal fuse that keeps blowing and venting restricted enough to choke the airflow.
Potomac, MD
Monogram refrigerator repair in Potomac
A panelled Monogram built-in in Potomac was running warm on both sides. Our technician opened the top grille and found the condenser fan motor had stopped, so the…A panelled Monogram built-in in Potomac was running warm on both sides. Our technician opened the top grille and found the condenser fan motor had stopped, so the compressor was overheating. A new fan motor brought the box back down to temperature.
Ashburn, VA
GE refrigerator repair in Ashburn
Neither the ice maker nor the water dispenser worked on a GE French-door refrigerator in Ashburn. Our technician checked the supply, then the water inlet valve at the…Neither the ice maker nor the water dispenser worked on a GE French-door refrigerator in Ashburn. Our technician checked the supply, then the water inlet valve at the back, and found the valve coil dead. A new valve brought both back.
Fairfax Station, VA
Monogram refrigerator repair in Fairfax Station
A white-panel Monogram built-in in Fairfax Station clicked every few minutes and never got cold. Our technician traced the click to the compressor start relay, which kept trying…A white-panel Monogram built-in in Fairfax Station clicked every few minutes and never got cold. Our technician traced the click to the compressor start relay, which kept trying and failing to start the compressor. With a new relay the compressor ran steadily.
Arlington, VA
GE Profile oven repair in Arlington
The upper oven of a GE Profile double wall oven in Arlington worked, while the lower one stayed cold. Our technician tested the lower bake element, found it…The upper oven of a GE Profile double wall oven in Arlington worked, while the lower one stayed cold. Our technician tested the lower bake element, found it open, and replaced it. Both cavities held temperature on the test.
McLean, VA
GE microwave repair in McLean
The grille and control panel are off this GE over-the-range microwave in McLean. The photo shows the control area open during the control checks described in the job note.
Washington DC, DC
GE microwave repair in Washington DC
Heating checks on a GE Profile built-in microwave in Washington DC. This photo focuses on the microwave and its right-side controls, separate from the oven below it.
Falls Church, VA
GE dryer repair in Falls Church
Our technician repaired a GE laundry center in Falls Church, the compact kind that stacks a washer and a dryer into one unit.
Alexandria, VA
GE washer repair in Alexandria
A GE stacked laundry center in Alexandria was wedged into a narrow closet. Our technician took the front panel off the washer half to reach the outer tub,…A GE stacked laundry center in Alexandria was wedged into a narrow closet. Our technician took the front panel off the washer half to reach the outer tub, the motor and the pump assembly. On a stacked unit in a space that tight, getting to the parts is a large share of the job.
Tysons, VA
GE dryer repair in Tysons
The GE dryer stacked above its front-load washer in a Tysons closet needed two cycles for a load. Our technician cleared a clogged vent and replaced a cycling…The GE dryer stacked above its front-load washer in a Tysons closet needed two cycles for a load. Our technician cleared a clogged vent and replaced a cycling thermostat that was cutting the heat too early.
Great Falls, VA
GE range repair in Great Falls
Two surface elements on a GE range in Great Falls had quit heating, and the oven took far too long to preheat. Those two travel together on this…Two surface elements on a GE range in Great Falls had quit heating, and the oven took far too long to preheat. Those two travel together on this brand more often than not. The third one to watch for is an oven that cycles off early, before it ever reaches the set temperature.
Leesburg, VA
GE dryer repair in Leesburg
A GE dryer on a pedestal in Leesburg squealed through every cycle. Our technician found worn drum rollers and a dry idler pulley and replaced them. The drum turned quietly on the test.
Sterling, VA
Café range repair in Sterling
The bridge element on a Café slide-in electric range in Sterling stayed cold while the other four zones worked. Our technician tested the element under the glass, found it open, and replaced it.
Reston, VA
Monogram dishwasher repair in Reston
An older GE Monogram dishwasher with a rotary dial in Reston did nothing when the dial was turned. Our technician checked the door switch, then the timer behind…An older GE Monogram dishwasher with a rotary dial in Reston did nothing when the dial was turned. Our technician checked the door switch, then the timer behind the dial, and found the timer contacts burnt. A new timer brought every cycle back.
Chantilly, VA
GE laundry combo repair in Chantilly
The dryer on top of a compact GE laundry center in Chantilly hummed but the drum never turned. Our technician opened it up, found the drive belt snapped,…The dryer on top of a compact GE laundry center in Chantilly hummed but the drum never turned. Our technician opened it up, found the drive belt snapped, and fitted a new one along with a check of the idler.
Leesburg, VA
GE Profile dishwasher repair in Leesburg
A GE Profile dishwasher in Leesburg left a puddle under the cabinet after each run. Our technician pulled it out, found the sump seal leaking, replaced it, and…A GE Profile dishwasher in Leesburg left a puddle under the cabinet after each run. Our technician pulled it out, found the sump seal leaking, replaced it, and ran a full cycle with the base open to watch it.
Bethesda, MD
GE dishwasher repair in Bethesda
A GE dishwasher in a modern Bethesda kitchen blinked its lights and would not start a cycle. Our technician found the door latch switch not closing and replaced…A GE dishwasher in a modern Bethesda kitchen blinked its lights and would not start a cycle. Our technician found the door latch switch not closing and replaced it. It ran a full cycle on the test.
Burke, VA
GE washer repair in Burke
A grey GE front-load washer in Burke walked across the floor on spin. Our technician pulled it out, found the shock absorbers worn out, and replaced the set.
Oakton, VA
GE range repair in Oakton
Oven heat checks on a GE gas range in Oakton. The range is pulled forward with its oven door open and tools beside it.
Ashburn, VA
GE dishwasher repair in Ashburn
Dishes came out of a GE dishwasher under a quartz island in Ashburn clean but wet. Our technician tested the heating element, found it open, and replaced it.
Fairfax, VA
Monogram refrigerator repair in Fairfax
The ice maker in a GE Monogram built-in refrigerator in Merrifield had stopped making ice. Our technician traced it to the water inlet valve, which was frozen solid…The ice maker in a GE Monogram built-in refrigerator in Merrifield had stopped making ice. Our technician traced it to the water inlet valve, which was frozen solid and completely blocked. That valve is the only way water gets into the ice maker, so nothing was reaching it.
Arlington, VA
GE Profile refrigerator repair in Arlington
The ice maker in a GE Profile refrigerator in Arlington was leaking water down into the bin. Everything in there had frozen together into one solid block instead…The ice maker in a GE Profile refrigerator in Arlington was leaking water down into the bin. Everything in there had frozen together into one solid block instead of loose cubes. Our technician went out to it.
Falls Church, VA
Monogram refrigerator repair in Falls Church
A GE Monogram built-in refrigerator in Falls Church was running warm, and the compressor would not stop cycling. Our technician found the condenser fan motor seized. With nothing…A GE Monogram built-in refrigerator in Falls Church was running warm, and the compressor would not stop cycling. Our technician found the condenser fan motor seized. With nothing pulling air across the condenser, the compressor keeps running and the box never gets cold.
Rockville, MD
GE Profile range repair in Rockville
The lower oven on a GE Profile double-oven range in Rockville would not heat, while the upper one worked. Our technician tested the lower element, found it open,…The lower oven on a GE Profile double-oven range in Rockville would not heat, while the upper one worked. Our technician tested the lower element, found it open, and replaced it. Both ovens heated on the test.
Woodbridge, VA
GE Profile range repair in Woodbridge
One front element on a GE Profile double-oven range in Woodbridge would not heat. Our technician replaced the radiant element and it glowed on the test.
Falls Church, VA
GE washer repair in Falls Church
With the front panel off a GE front-load washer in Falls Church, the drum, the door boot seal and the outer tub were all in reach. Our technician…With the front panel off a GE front-load washer in Falls Church, the drum, the door boot seal and the outer tub were all in reach. Our technician opened it up that far to get a proper look at the parts behind the door.
Alexandria, VA
GE washer repair in Alexandria
A door seal and a drain problem brought our technician out to a GE front-load washer in Alexandria, and he repaired both. The door boot is the rubber…A door seal and a drain problem brought our technician out to a GE front-load washer in Alexandria, and he repaired both. The door boot is the rubber seal around the opening, and it is the one part standing between a full drum of water and the laundry room floor.
Herndon, VA
GE laundry combo repair in Herndon
The washer in a GE stacked laundry center in a narrow Herndon closet hummed but the agitator never moved. Our technician found the drive belt thrown and the motor pulley worn, and replaced both.
Sterling, VA
GE dryer repair in Sterling
A GE dryer on a pedestal in Sterling kept ending its cycle with the clothes still damp. Our technician found the moisture sensor bars coated with softener residue,…A GE dryer on a pedestal in Sterling kept ending its cycle with the clothes still damp. Our technician found the moisture sensor bars coated with softener residue, cleaned them, and the cycles finished normally.
Bethesda, MD
GE washer installation in Bethesda
A new GE top-load washer went into a laundry closet in Bethesda. Our technician set it in place, leveled it, connected the water and the drain, and ran a test cycle before leaving.
Great Falls, VA
GE washer repair in Great Falls
Clothes came out of a GE washer in Great Falls soaking wet and still dirty. The agitator had stopped moving partway through, so the machine finished the cycle…Clothes came out of a GE washer in Great Falls soaking wet and still dirty. The agitator had stopped moving partway through, so the machine finished the cycle without ever washing anything. Our technician was on-site to find the cause.
July 2026Falls Church, VA
GE dryer repair in Falls Church
The drum on a GE dryer in Falls Church was still spinning, but there was no heat in it. GE dryer calls here come in three shapes: no…The drum on a GE dryer in Falls Church was still spinning, but there was no heat in it. GE dryer calls here come in three shapes: no heat while the drum turns, a unit that will not start at all, and a burning smell. Our technician went out to it.
Vienna, VA
GE refrigerator repair in Vienna
Cooling had failed on a GE French-door refrigerator in Vienna, and the refrigerant side of the system was the reason. Our technician repaired it. Refrigerant is what actually…Cooling had failed on a GE French-door refrigerator in Vienna, and the refrigerant side of the system was the reason. Our technician repaired it. Refrigerant is what actually carries heat out of the box, so when it is low or leaking nothing else in the fridge can hold temperature.
Silver Spring, MD
GE laundry combo repair in Silver Spring
The washer in a GE stacked laundry center in Silver Spring stopped draining. Our technician took the front panel off, found a sock jammed in the drain pump…The washer in a GE stacked laundry center in Silver Spring stopped draining. Our technician took the front panel off, found a sock jammed in the drain pump and the pump cracked, and replaced it.
Manassas, VA
GE washer repair in Manassas
The door on a GE front-load washer in Manassas sagged and would not latch. Our technician took the door off, found the hinge bent, and replaced it.
Lake Barcroft, VA
GE washer repair in Lake Barcroft
A GE top-load washer in Lake Barcroft kept filling on its own while switched off. Our technician found the water inlet valve stuck open and replaced it.
Springfield, VA
GE microwave repair in Springfield
A GE over-the-range microwave in Springfield buzzed loudly and did not heat. Our technician took it down, opened the chassis, found the magnetron failed, and replaced it.
Springfield, VA
GE washer repair in Springfield
A GE top-load washer in Springfield hummed but would not agitate or spin. Our technician flipped up the console, tested the motor capacitor, found it failed, and replaced it.
Chantilly, VA
GE cooktop repair in Chantilly
One burner on a GE glass cooktop in Chantilly stayed cold. Our technician lifted the glass, tested the radiant element, found it open, and replaced it.
Centreville, VA
GE dryer repair in Centreville
A GE dryer in Centreville thumped as it ran. Our technician took the front panel off and found the blower wheel loose on the motor shaft. A new blower wheel ended the thumping.
Tysons, VA
GE laundry combo repair in Tysons
The washer in a GE laundry center beside the water heater in a Tysons utility room shook hard on spin. Our technician found worn suspension springs and replaced the set.
Reston, VA
GE laundry combo repair in Reston
The dryer in a GE stacked laundry center in Reston barely warmed the clothes. Our technician pulled the unit out of its closet, found the vent hose crushed behind it, and replaced the hose.
November 2026Washington, DC, DC
GE ice maker repair in Washington, DC
In Washington DC, a GE ice maker had stopped filling and heavy frost had built across the back wall of the freezer. When the mold tray stays dry…In Washington DC, a GE ice maker had stopped filling and heavy frost had built across the back wall of the freezer. When the mold tray stays dry like that, the ice maker often keeps cycling anyway, turning over without ever dropping a cube.
Falls Church, VA
GE range repair in Falls Church
Our technician was in Falls Church diagnosing a GE electric range with a failed burner element. A multimeter went onto the control terminals to take readings there.
McLean, VA
GE dryer repair in McLean
Two things had failed at once on a GE front-load dryer in McLean: the control board and the door. Our technician repaired both. A control board fault is…Two things had failed at once on a GE front-load dryer in McLean: the control board and the door. Our technician repaired both. A control board fault is the frustrating kind, because the dryer can look perfectly fine and still refuse to start.
Burke, VA
GE ice maker repair in Burke
The ice maker in a GE side-by-side in Burke stopped filling the bucket. Our technician tested the ice maker, found the module failed, and replaced it.
Silver Spring, MD
GE freezer repair in Silver Spring
A GE freezer in Silver Spring iced over on the back wall and stopped freezing. Our technician found the defrost timer stuck and replaced it.
Alexandria, VA
GE range repair in Alexandria
A coil burner on a GE electric range in Alexandria had burned out. Our technician lifted the old element out, leaving the socket it plugs into exposed, and…A coil burner on a GE electric range in Alexandria had burned out. Our technician lifted the old element out, leaving the socket it plugs into exposed, and had the replacement burner ready to go in.
October 2026Vienna, VA
GE microwave repair in Vienna
A GE microwave in Vienna had power but would not heat anything. Our technician opened it up to test the magnetron, the part that actually makes the heat.…A GE microwave in Vienna had power but would not heat anything. Our technician opened it up to test the magnetron, the part that actually makes the heat. Two other faults show up on these: the fan staying on by itself, and a door switch the control stops reading.
August 2026McLean, VA
Monogram microwave repair in McLean
In the Pimmit Hills part of McLean, a GE Monogram speedcook microwave stopped heating. A technician went out to look at it. Three faults come up most on…In the Pimmit Hills part of McLean, a GE Monogram speedcook microwave stopped heating. A technician went out to look at it. Three faults come up most on these: a weak magnetron, a burned-out lamp, and a keypad that has gone dead.

FAQ

GE repair: frequently asked questions

Do you repair GE Profile, Café and Monogram, or only plain GE?

All four. They are one company, GE Appliances, and the parts come from the same catalog. The work is the same job with a different letter at the front of the model number.

Is FixDaddy an authorized GE servicer?

No. We are an independent repair company with no tie to GE Appliances or Haier. If your appliance is still inside GE's own warranty, call GE first so the repair is covered. Once it is out of that warranty, we repair it and stand behind the work with our own 90-day parts-and-labor warranty.

How much does a GE repair cost?

Our visit fee is $89. The technician finds exactly what's wrong and gives you the full repair price at your home, no pressure. If you go ahead, the $89 counts toward the repair. We do not quote repair prices over the phone because on a GE the same symptom can be a small part or a big one, and only a look tells which.

My GE dryer runs but stays cold. Is that worth fixing?

Usually, yes. On a GE electric dryer that is most often the thermal fuse, the high-limit thermostat or the heating element, and the fuse blows because the vent is blocked, so the vent has to be dealt with too or the new fuse goes the same way. Our technician gives you the price at the house before any work starts, and the repair carries a 90-day warranty.

My GE fridge is a 2009 side-by-side. Can you still get parts?

Almost always. GE keeps the same part numbers in its catalog for years, the WR-prefixed refrigeration parts are stocked by GE's own parts store and by the big distributors, and the common ones ride on our truck. If a part has to be ordered, our technician orders it and comes back to fit it.

Why does my GE top-loader fill and drain but never wash?

On a GTW top-load washer that is the classic mode shifter symptom. The shift actuator moves the drive between agitate and spin, and when it sticks in spin the basket runs fine but the agitator never moves, so the clothes come out wet and dirty. It is a known part on these washers.

Do you work on Haier appliances too?

Yes. Haier is one of the brands we repair, and Haier and GE Appliances are one company, with Haier models carrying GE Appliances part numbers.

Do you repair GE dishwashers, microwaves and wall ovens?

Yes. GE dishwasher repair covers the built-in GDT and GDF models; to reach the pump and, on many of them, the Piranha hard-food disposer, the dishwasher comes out from under the counter. GE microwave repair covers the Spacemaker over-the-range units and the Profile models: door switches, the magnetron and the high-voltage parts around it. We also repair GE and Profile wall ovens and Advantium speedcook ovens.

Other brands